Crown Knot Quick Wick® | Clamp On Fire Hoop Wicks

Details

The main difference between Crown-Knot Quick Wick and The Original Quick Wick is the absence of any metal fastening the crown knot itself. Otherwise, they are each about the same size, same weight, hold a similar amount of fuel and therefore have similar burn times.

Crown Knot wick heads are approximately 1.5" tall x 1.5" wide
Spines are approximately 5 inches long from the outside of the tubing to the tip of the wick head.
Different clamp sizes available for different tubing diameters.
Weigh approximately 1.5 ounces (about the weight of 6 quarters).
Stainless Steel construction for the best resistance to rust.
Flexible cable-spine is rigid, like a rod, but springs back into shape when bent.
Designed to last several lifetimes if properly cared for.
Hand-made in North Carolina, U.S.A.
One FREE Nut Driver with 5 or more QWs (even easier than a screwdriver)

A Crown-Knot version of The Original Quick Wick.
Make Any Hoop a Firehoop. This super-light wick attaches easily onto any hoop (or any tube, pole, staff, bike axle, etc). The Quick Wick® allows you to change your fire hoop size as your regular hoop size evolves.

Use Quick Wicks® on different hoops, taped or sanded, minis & LED hoops. (note: this could void a warranty on an LED hoop). Other ideas: throw some on each end of a staff, attach them on a helmet, get creative. The paper-thin belt is virtually unnoticeable when hooping and the clamp does not get hot.

SIZING:

Quick Wick® Sizes (Outside Diameter of your tubing)	Metric Tubing Sizes OD
5/8" OD	14 - 16 mm
3/4" OD	19 - 20 mm

If you are unsure of the Outside Diameter of your tubing (not hoop OD), please measure it. It is very important that you get the correct size Quick Wick®. Each clamp is specifically designed for certain tubing sizes. The increments are very small so precision counts.